Type 2 AC surge protector - 3-phase+N

Type 2 AC surge protector - 3-phase+N

Rs. 0.00
Skip to product information
Type 2 AC surge protector - 3-phase+N

Type 2 AC surge protector - 3-phase+N

Rs. 0.00
Parameter Description
Product Type 2 + 3 AC Surge Protector
SPD Type Type 2 + Type 3 (IEC)
Technology VG Technology (MOV + GSG)
Network 230/400 V, 3-Phase + Neutral AC (TT/TNS)
SPD Configuration 3-Phase + Neutral
Maximum AC Operating Voltage (Uc) 275 Vac
Nominal Discharge Current (In) 20 kA (15 × 8/20 µs impulses)
Maximum Discharge Current (Imax) 50 kA per pole
Total Maximum Discharge Current 50 kA
Combination Wave Withstand (Uoc) 6 kV (1.2/50 µs – 8/20 µs)
Connection Modes L/N and N/PE
Protection Level (Up L/N) 1.5 kV
Protection Level (Up N/PE) 1.5 kV
Residual Voltage at 5 kA (L/N) 0.7 kV
Residual Voltage at 5 kA (N/PE) 0.7 kV
Temporary Over Voltage (5 sec) 335 Vac (Without Disconnection)
Temporary Over Voltage (120 min) 440 Vac (Withstand)
Temporary Over Voltage N/PE 1200 V / 300 A / 200 ms
Leakage Current (Ipe) None
Follow Current (If) None
Admissible Short-Circuit Current (Isccr) 50,000 A
Connection Screw Terminals (2.5–25 mm², 35 mm² rigid)
Mounting 35 mm DIN Rail (EN 60715)
Housing Material Thermoplastic UL94 V-0
Operating Temperature -40°C to +85°C
Protection Rating IP20
Failsafe Mode Disconnection from AC Network
Disconnection Indicator Mechanical Red/Green Indicator (Each Pole)
Remote Signaling Changeover Contact
Remote Signaling Wiring Up to 1.5 mm²
Remote Signaling Rating 250 V / 0.5 A (AC), 30 V / 3 A (DC)
Spare Module MDAC50VG-275 + MDAC50G-255
Dimensions 4TE (EN43880), See Diagram
Weight 0.343 kg
Internal Disconnector Thermal Disconnector
Recommended Ground Fault Breaker Type 'S' or Delayed
Back-up Protection 50–160 A gG Fuses
Standards Compliance IEC 61643-11, EN 61643-11, UL1449 Ed.5
Certification KEMA
Part Number 821130244

You may also like